The ProGuard BOLT ON has many design features, take a look at the information below:
-
FIRST LARGE DIRECT MOUNT MUDGUARD OF ITS KIND
-
NO ZIP TIES OR VELCRO STRAPS
-
NEATEST LOOKING LARGE MUDGUARD ON THE MARKET
-
EASILY REMOVED IN SECONDS
-
HEIGHT ADJUSTABILITY BY 6MM
-
ANGLE ADJUSTABILITY FOR BETTER FIT IF NEEDED VIA 2 TILT BRACKETS
-
2 THICK RUBBER PADS TO PROTECT YOUR FORKS
-
MINI SIZE – GREAT ALL YEAR ROUND MUDGUARD OFFERING GOOD PROTECTION
-
STANDARD SIZE – OFFERS VERY HIGH LEVELS OF PROTECTION
-
STICKER RECESS FOR EASY FIT AND STICKER PROTECTION
-
OUR SPECIAL PROVEN POLYPROPYLENE MIX IS USED FOR MAXIMUM DURABILITY AND FIT
-
BEAUTIFUL STYLING – EASY CLEAN MATTE TEXTURED FINISH WITH GLOSS HIGHLIGHTS
-
LONG FRONT TO COPE WITH HIGH SPEED MUD AND SPRAY
-
SMALL TURN DOWN AT FRONT TO DEFLECT SPRAY AND FOR BETTER TYRE CLEARANCE
-
LONG REAR WITH RAISED FLICK OFFERS MORE PROTECTION ESPECIALLY WHEN THE WHEEL IS TURNED
-
PROVEN SEAL SHIELD TO INCREASE FORK PROTECTION AND EXTEND SERVICE INTERVALS
-
MINI & STANDARD COMPATIBILITY
-
WHEELS:26” 27.5” 29”TYRES:up to a 3” tyreFORKS:
This direct mount mudguard is designed for the forks listed below that have the THREADED HOLES in the rear of the fork brace:
-
FITS FOX 32, 34, 36, 49 FORKS - STD & BOOST (doesn’t fit FOX 40 in 26” or 27.5” without our adapter bracket)
-
FITS NEW MARZOCCHI FORKS* (using the FOX chassis)
-
FITS OHLINS FORKS*
-
FITS SR SUNTOUR FORKS**
*only use outer two bolts on RXF34 forks
**Some SR SUNTOUR forks have an unthreaded straight through hole in the centre of the fork brace, you can purchase a SLEEVE PACK to allow the PROGUARD BOLT ON to fit these forks (sold separately)
NOTE: brackets are being developed to allow the mudguard to fit other forks such as DVO, X-Fusion, Cane Creek, & Fox 40
DESIGN FEATURES IN MORE DETAIL
RUBBER PADS
The sides of the mudguard are flared out to touch and hold onto the fork to dampen resonance and create more stability, thick rubber pads have been included for the sides of the mudguard to protect the fork
BOLTS
We had to design and manufacture our own custom M3 bolt as we couldn’t find one good enough to offer the wide clamping force and durability we needed. The following bolts come supplied in the packaging:
M3 x 2 (FOX / MARZOCCHI)
M4 x 3 (OHLINS)
M6 x 1 (SR SUNTOUR)
TILT BRACKETS
We have included two TILT BRACKETS that just clip onto the front of the bracket allowing you to raise or lower the front for a better angle if needed, if any finer tuning is needed just zip the end you want to lower against the wheel and leave overnight
ALLEN KEYS
2 Allen keys have been provided in the packaging at just the right length to help you fit the mudguard
REAR FLICK
The raised rear flick was designed to simply offer a little bit more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned
STICKER INDENT
The centre indent is a nice easy reference to apply our coloured stickers to, this indent also prevents the sticker from sitting proud on the surface of the guard which would leave it vulnerable to durability issues. The adhesive used is very special and super strong and can be jet washed
SEAL SHIELD
Our widely acclaimed Seal Shield offers greater protection for your fork seals from high velocity mud and spray lengthening service intervals
MATERIAL
We make our mudguard material thicker than the competition out there which together with our unique polypropylene mix allows massive impact protection, flexibility, and importantly cold weather durability and strength.
NB: If you don’t like the gloss highlights then spray the mudguard with GT85 and rub, this will remove the high gloss finish
BOLT PACKS
Additional full bolt packs can be purchased should you need them
SLEEVE PACK – SR SUNTOUR
Some SR Suntour forks have a straight through UNTHREADED hole in the centre of the fork brace, you can purchase a sleeve pack that allows you to fit the ProGuard BOLT ON to the fork